L3支持短信查询状态和远程配置

admin

目前只在VB_L3上加入了此功能，其它的设备要支持也很容易。

VB-L3 supports SMS report and config

firmware_BVS-W1010-VB-L3_201506081557_release.bin

note:

pls reset todefault after upgrading by lan_search_config_tool

certain 3G/4Gmodem supported, EM820U/U8300

SMS sent	Function/response from  DVS
To check and query the DVS
1001(command)	check all  supported cmd by the DVS
cx100	Check cmds
cx1101(server)	Check server  IP and port
cx1102
cx1103(status)	Report device  status,includes 3G/4G modem status
To set and config the DVS
pz100 (ckeck)	Check cmd
pz1101(ipconfing)	Config server  IP and port
pz1102
pz1103(reset)	reset IP and  port and reports on the IP 94.92.188.114 and default port 9702
pz1104	setup APN
pz1105	Reboot system

Send 1001--Discover all set of supported commands

Return

Demo 1001 =command

     cx1001= Server: get support information

     pz1001= ipconfing: supported configuration commands

Send CX100

Return

    addressthe query server and the port number: cx1101

    cx1102= online: Discover devices information time on-line

    cx1103= status: Query status information module

Sendpz1001 (ipconfing)

Return

    pz1101= Server: configure the server address and port number

    pz1102nline-setting segment information device

    pz1103:set status information module

Sendcx1101

Return

    Addressserver addr + port the port number

Sendcx1102

Return

     (1)(00: 00-23: 59.1) ...

     ....

SendStatus (cx 1103)

Return

device_name,15/11/2011 15:22:09 UTC

signal: LTE:60%, 3G / WCDMA: 90%

power: on

data flow: VodafoneUK 3G 54%

speed: 54.71KB /s, 0.21s

REC: on

Send Serverpz1101 = ipconfig port number address

Settingsuccessful return OK

Send pz1102 week(1-7) time interval (1-6) (00: 00-23: 59.1)

Settingsuccessful return OK

Send pz1104(module number) (APN name)

Settingsuccessful return OK

Send pz1105:  to reboot the device

Settingsuccessful return OK