AXIS cam managment system and MPU onvif issue

peter

I can not add a camera to the AXIS cam managment system (which accepts an onvif stream at the input)

axis sees the camera but can not add it because of network errors

axis has a free tool for compatibility testing
https://www.axis.com/pl-pl/axis- ... ility-tool/download

below the report
goo.gl/TkJuvT


why MAC address is read as 123456?


---- Device Information ----

MAC address: 123456
IP: 10.192.0.43 : 8000
Manufacturer: Happytimesoft
Model: IP Camera
Firmware version :2.4
Hardware ID: 1.0
Interface ID:

besovideo

user/passwd: admin/admin,
you mean the only problem is the incorrect MAC, that 123456 is pre-set by us at random.
we may set it to anything.

xuwei

we did set SerialNumber == "123456"，not mac address

peter

communication verifier says that I can not add a camera because I can not read MAC addres correctly

please check the report

xuwei

We test our program by the axis test tool,it shows our program is not support profile S. we do support profile g and c, but do not support profile s. Is it related to this problem?

peter

I'm not sure if this basic function of reading the mac address is different in the S profile

peter

with new MPU version Axis still does not see MAC addres {
  "Manufacturer": "Happytimesoft",
  "Model": "IP Camera",
  "FirmwareVersion": "2.4",
  "HardwareId": "1.0",
  "MacAddress": "",
  "SerialNumber": "48:2c:a0:64:72:8d",
  "DigestAuthenticationSupport": "Yes",
  "VideoSourceCount": 1,
  "HasMicrophone": true,
  "HasSpeaker": false
}


2018-11-05 11:18:53,749  WARN  [17.0.] [1_UI] AcsDct.Core\InformationCollection\Private\DeviceInformationService.cs(156), AcsDct.Core.InformationCollection.Private.DeviceInformationService ParseMacAddress <> - MAC address is empty

xuwei

peter post on2018-11-5 18:25
with new MPU version Axis still does not see MAC addres {
  "Manufacturer": "Happytimesoft",
  "Mo ...

We found the cause of the problem. The function to get the MAC address needs to be adjusted. We will give you a test version later.

peter

were you able to fix the issue?

peter

Still got some issues with Axis, After applying fix I am able to add cam to the Axis system, and I see video in axis, but only right after adding cam. When I am trying to connect with the camera again after few minutes, I can not.

somtimes I see this error somtimes not, maybe this is the issue or it is something else, are you able to install "Axis camera station client" - free trial 30 days, and check why can behaves like that.

2018-11-09 09:17:17,534  TRACE [] [  23] Axis.Net\Discovery\Private\Protocol\WsDiscovery\WsDiscoveryReceiver.cs(200), DeviceDiscovery IsValidDeviceResponse <6> - Skipping discovered device not compliant to Profile S: (http://192.168.0.189:8080/DeviceService/)
2018-11-09 09:17:17,534  DEBUG [] [  23] Axis.Net\Discovery\Private\Protocol\WsDiscovery\WsDiscoveryReceiver.cs(146), Axis.Net.Discovery.Private.Protocol.WsDiscovery.WsDiscoveryReceiver FindProgressChanged <> - Discarding device (http://192.168.0.189:8080/DeviceService/)
2018-11-09 09:17:17,558  TRACE [] [  24] Axis.Net\Discovery\Private\Protocol\WsDiscovery\WsDiscoveryReceiver.cs(200), DeviceDiscovery IsValidDeviceResponse <6> - Skipping discovered device not compliant to Profile S: (http://192.168.0.92:3911/,http://[fe80::d6c9:efff:feff:cb1]:3911/)

(maybe you can "cheat" the camera and send information that it is compatible with onvif profile S)