SDK的认证和上传的接口

besovideo

传音频，还是传视频，是由smarteye client决定的，是用户点播的模式，由CU传达给PU来执行的。

eviicam

调用inviteAV之后报以下错误，是不是底层收到InputVideoData传来的数据之后做了解码造成的？

我们的需求是只要把流推出去就可以，不用做解码（或者说解码已经做了）

I/OMXCodec: Attempting to allocate OMX node 'OMX.Exynos.AVC.Encoder'
I/OMXCodec: Successfully allocated OMX node 'OMX.Exynos.AVC.Encoder'
I/codec_stagefright: 1280 720 25 614400 1
I/OMXCodec: [OMX.Exynos.AVC.Encoder] OMXCodec::start mState=1
I/OMXCodec: [OMX.Exynos.AVC.Encoder] allocating 5 buffers of size 1382400 on input port
I/OMXCodec: [OMX.Exynos.AVC.Encoder] allocating 4 buffers of size 1382400 on output port
I/codec_stagefright: 1280 720 25 614400 1
I/OMXCodec: [OMX.Exynos.AVC.Encoder] Now Idle. Component sends idle done Event

A/libc: Fatal signal 8 (SIGFPE), code -6, fault addr 0x68a7 in tid 27158 (m.icare.mpudemo)

E/OMXCodec: [OMX.Exynos.AVC.Encoder] err = -2147483648
I/OMXCodec: [OMX.Exynos.AVC.Encoder] stop mState=4
I/OMXCodec: [OMX.Exynos.AVC.Encoder] stop() sendCommand(63, OMX_CommandStateSet, OMX_StateIdle)
I/OMXCodec: [OMX.Exynos.AVC.Encoder] Now Idle. Component sends idle done Event
I/OMXCodec: [OMX.Exynos.AVC.Encoder] stopOmxComponent_l() mstate = 1

I/codec_stagefright: VideoEncode::run exit!
A/libc: Fatal signal 11 (SIGSEGV), code 1, fault addr 0x4 in tid 27158 (m.icare.mpudemo)

besovideo

哪里的解码？MPU侧只是编码

eviicam

我们的app继承你们的就是推流这个功能，主要就是把视频分享出去，可以通过SmartEye客户端观看。

eviicam

视频流是通过ffmpeg从执法仪读取过来的，现在就是使用你们的sdk推到rtsp服务器

那你们的底层会编码InputVideoData出进去的数据吗？如果会的话，刚才那个error log可能是什么导致的？

国士无双

log不全，麻烦把下面的调用栈打印信息贴出来

eviicam

06-12 15:54:47.471 8047-8278/com.icare.mpudemo I/SIP: sendKeepalive_count = 0,iResult = 0
06-12 15:54:48.991 8047-8345/com.icare.mpudemo I/RTP: recvPacketLossRate = 0,sendPacketLossRate = 0
06-12 15:54:50.471 8047-8278/com.icare.mpudemo I/SIP: sendKeepalive m_applierID = 20827
06-12 15:54:51.651 8047-8276/com.icare.mpudemo I/SIP: iResult =0
06-12 15:54:51.651 8047-8276/com.icare.mpudemo I/SIP: iStatusCode 200
06-12 15:54:51.981 8047-8276/com.icare.mpudemo I/SIP: sipU_28241959_0_-1@116.24.21.49
06-12 15:54:51.981 8047-8276/com.icare.mpudemo I/SIP: processInvite+++++++++++++++++++++++
06-12 15:54:51.981 8047-8276/com.icare.mpudemo I/SIP: get sps and pps
06-12 15:54:51.981 8047-8047/com.icare.mpudemo I/test_mpu: auth--->type = invite.av----val =null---avDir = 5
06-12 15:54:51.991 8047-9302/com.icare.mpudemo I/MPU_Codec: SAVThread::run.............
06-12 15:54:51.991 8047-8345/com.icare.mpudemo I/RTP: recvPacketLossRate = 0,sendPacketLossRate = 0
06-12 15:54:52.001 8047-9303/com.icare.mpudemo I/OMXClient: Using client-side OMX mux.
06-12 15:54:52.001 8047-9303/com.icare.mpudemo I/codec_stagefright: frameRate=25 bitRate=614400 iFramesInterval=1
06-12 15:54:52.001 8047-9303/com.icare.mpudemo I/codec_stagefright: 1280 720 25 614400 1
06-12 15:54:52.001 8047-9303/com.icare.mpudemo I/codec_stagefright: 1280 720 25 614400 1
06-12 15:54:52.011 8047-9303/com.icare.mpudemo I/OMXCodec: Attempting to allocate OMX node 'OMX.Exynos.AVC.Encoder'
06-12 15:54:52.021 8047-9304/com.icare.mpudemo W/System.err: AVFrameFlag = 1180063816---AVFrameLen = 147025---VFrameType = 1
06-12 15:54:52.051 8047-9303/com.icare.mpudemo I/OMXCodec: Successfully allocated OMX node 'OMX.Exynos.AVC.Encoder'
06-12 15:54:52.061 8047-9303/com.icare.mpudemo I/codec_stagefright: 1280 720 25 614400 1
06-12 15:54:52.061 8047-9303/com.icare.mpudemo I/OMXCodec: [OMX.Exynos.AVC.Encoder] OMXCodec::start mState=1
06-12 15:54:52.061 8047-9303/com.icare.mpudemo I/OMXCodec: [OMX.Exynos.AVC.Encoder] allocating 5 buffers of size 1382400 on input port
06-12 15:54:52.061 8047-9303/com.icare.mpudemo I/OMXCodec: [OMX.Exynos.AVC.Encoder] allocating 4 buffers of size 1382400 on output port
06-12 15:54:52.071 8047-9303/com.icare.mpudemo I/codec_stagefright: 1280 720 25 614400 1
06-12 15:54:52.091 8047-8060/com.icare.mpudemo I/OMXCodec: [OMX.Exynos.AVC.Encoder] Now Idle. Component sends idle done Event
06-12 15:54:52.091 8047-9303/com.icare.mpudemo A/libc: Fatal signal 11 (SIGSEGV), code 2, fault addr 0xee800000 in tid 9303 (m.icare.mpudemo)
06-12 15:54:52.441 8047-9304/com.icare.mpudemo W/System.err: AVFrameFlag = 1180063816---AVFrameLen = 9929---VFrameType = 2

eviicam

和这下面的代码有关吗？

encode.iBitrate = 614400; 这个值我不确定
encode.iYUVConvert = 5; 这个也不明白什么意思，还有这个encode.iColorFormat = 0;
因为现在写的DEMO读取的是一个本地H264文件.

    public BVPU_VideoControl_Encode getEncode() {
        BVPU_VideoControl_Encode encode = new BVPU_VideoControl_Encode();
        encode.iBitrate = 614400;
        encode.iFramerate = 25;
        encode.iColorFormat = 0;
        encode.iHeight = 720;
        encode.iWidth = 1280;
        encode.iYUVConvert = 5;
        return encode;
    }

eviicam

国士无双 post on2017-6-12 15:49
log不全，麻烦把下面的调用栈打印信息贴出来

已经贴出来了，麻烦看下

国士无双

是yuv的一种格式，具体处理看下MPULoadConfig文件中loadDefMobileColorFormat()处理逻辑，不同机型的类型不一样，还有log文件下面还有fatal的具体信息打印吧