mobile CCTV,mobile surveillance,police body worn cameras

 forgetPW
 registerNow
search
12NextPage
backToList newPost
view: 5709|reply: 18
打印 prevThread nextThread

WiFi眼镜预览黑白

[copyURL]

4

主题

19

帖子

52

积分

member

Rank: 2

积分
52
jumpTo
owner
poston 2018-10-10 10:33 | authorOnly 回帖奖励 |倒序浏览 |阅读模式
通过MPU连接WiFi眼镜之后打开预览,发现预览为黑白。通过监视器查看为彩色,但是本地MPU 奔溃
10-10 10:22:55.705 9859-10489/com.smarteye.mpu A/libc: Fatal signal 11 (SIGSEGV), code 1, fault addr 0x0 in tid 10489 (om.smarteye.mpu)


reply

使用道具 report

2

主题

414

帖子

1188

积分

vipMem

Rank: 6Rank: 6

积分
1188
sofa
poston 2018-10-10 10:57 | authorOnly
1.我们出的MPU可以正常预览么?
2.什么情况下会崩溃,必现还是不确定
3.崩溃日志需要完整的系统输出日志
reply agree Against

使用道具 report

4

主题

19

帖子

52

积分

member

Rank: 2

积分
52
bench
 Owner| poston 2018-10-10 12:28 | authorOnly
xuwei post on2018-10-10 10:57
1.我们出的MPU可以正常预览么?
2.什么情况下会崩溃,必现还是不确定
3.崩溃日志需要完整的系统输出日志

你们的MPU可以正常预览 ,因为我这边是根据你们老的MPU代码进行二次开发的。所以出现黑白预览是不是有什么参数需要设置的
奔溃出现在 控制台打开传输通道(数据为WIFI眼镜数据,如果是手机摄像头数据则不会奔溃)
奔溃日志就这些
reply agree Against

使用道具 report

4

主题

19

帖子

52

积分

member

Rank: 2

积分
52
ground
 Owner| poston 2018-10-10 13:44 | authorOnly
这是连接眼睛后的日志

  1. 10-10 13:42:36.516 9576-9711/com.smarteye.mpu I/WifiIPC: WifiIPC pthread id = 9576
  2.     {"bHasAudio":0,"iHeight":0,"iStatus":0,"iWidth":0,"szCmd":"DESCRIBE","szUrl":"rtsp://192.168.43.59:554/rtsp_live0"}
  3. 10-10 13:42:36.517 9576-9576/com.smarteye.mpu D/UVCControl: selfCheck
  4. 10-10 13:42:36.519 9576-9712/com.smarteye.mpu I/OpenRTSP: start! id= 0
  5. 10-10 13:42:36.519 9576-9712/com.smarteye.mpu D/TcpOptimizer: TcpOptimizer-ON
  6. 10-10 13:42:36.526 9576-9576/com.smarteye.mpu I/OSDMgr: szCustomText = 123456
  7.     id = 0 create, x = 20,y = 20
  8.     id = 1 create, x = 20,y = 120
  9.     id = 2 create, x = 20,y = 220
  10.     id = 3 create, x = 20,y = 320
  11.     id = 4 create, x = 20,y = 420
  12.     id = 5 create, x = 0,y = 0
  13.     loadConfig finish.[{"iCount":5,"stItem":[{"iEnable":1,"iPosX":20,"iPosY":20,"iRenderStyle":1,"iScaleX":0,"iScaleY":0},{"iEnable":0,"iPosX":20,"iPosY":120,"iRenderStyle":1,"iScaleX":0,"iScaleY":0},{"iEnable":0,"iPosX":20,"iPosY":220,"iRenderStyle":1,"iScaleX":0,"iScaleY":0},{"iEnable":0,"iPosX":20,"iPosY":320,"iRenderStyle":1,"iScaleX":0,"iScaleY":0},{"iEnable":0,"iPosX":20,"iPosY":420,"iRenderStyle":1,"iScaleX":0,"iScaleY":0}],"szCustomText":"123456"}]
  14. 10-10 13:42:36.530 9576-9714/com.smarteye.mpu D/License: 36
  15. 10-10 13:42:36.531 9576-9576/com.smarteye.mpu D/MPUService: onMessageFromNative rtspcam.control.response
  16. 10-10 13:42:36.531 9576-9576/com.smarteye.mpu D/WifiIPC: response = {"szCmd": "TEARDOWN", "iStatus":200}
  17. 10-10 13:42:36.531 9576-9576/com.smarteye.mpu D/RTSPCamControl: {"szCmd": "TEARDOWN", "iStatus":200}
  18. 10-10 13:42:36.532 9576-9576/com.smarteye.mpu I/RTSPCamControl: RTSP_CMD_TEARDOWN success
  19. 10-10 13:42:36.540 9576-9714/com.smarteye.mpu I/BillTool: {"stEntity":{"iAPILevel":25,"iDensityDpi":420,"iHeightPixels":2220,"iWidthPixels":1080,"szAndroidID":"7535a7c67952a61c","szBoard":"msm8998","szBrand":"samsung","szBuildTime":"1521427923000","szDeviceID":"358520085977242","szFingerPrint":"samsung/greatqltezc/greatqltechn:7.1.1/NMF26X/N9500ZCS2BRC2:user/release-keys","szHardware":"qcom","szMacAddress":"02:00:00:00:00:00","szModel":"SM-N9500","szRadio":"N9500ZCS2BRC2"},"szAuthParam":"ky62otrHVz8VCLe29kWqn3xqsfPiKnWHPyCZDJqdxhn9qmsBYXPjogKHm4YFClv6C894giiEraRC+8g4qo0skgGz+JUx8V86b0/Aql56HhLgGYdQ7ShwY2JUZcSH5O3r9S8kgVI2KwXexvc+f10n1Zd6fX7Nh4Sty/Mbg7Xny96n9vHTU4v4D13VNWaaBO+LlXkFke80KCkVtfYSQXh4maweD9c6jlEOlimaEFhvvLZr+xGkdhKYhUloeVHmFGZP","szLicense":"F88291D8-E4AD-45E7-8B79-B081E93BB586","szPath":"/storage/emulated/0"}
  20. 10-10 13:42:36.543 9576-9576/com.smarteye.mpu D/MPUService: onMessageFromNative auth
  21. 10-10 13:42:36.543 9576-9576/com.smarteye.mpu I/BillTool: auth---->{"iAuthStatus": 200, "szAuthType":"auth.type.imei"}
  22. 10-10 13:42:36.548 9576-9576/com.smarteye.mpu I/selectCodec: SelectCodec : OMX.qcom.video.encoder.hevc
  23. 10-10 13:42:36.550 9576-9576/com.smarteye.mpu D/ConnectHandler: login:
  24. 10-10 13:42:36.552 9576-9683/com.smarteye.mpu I/SIP: pMsg->iAction = 0
  25. 10-10 13:42:36.553 9576-9683/com.smarteye.mpu I/SIP: BVCSP_Login success!
  26. 10-10 13:42:36.554 9576-9576/com.smarteye.mpu I/System.out: szServerAddr=139.224.68.157,szDeviceName=SM-N9500,szChannelName=video,iServerPort=9702,iDeviceID=630682178,iMediaDir=13,bGPSEnable=1,iVersionCode=1759,szVersionName=20180118,szDeviceType=PU,szManufacturer=smartvideo
  27.     bOpenCVManager=0,bFaceDetection=0,bFaceRecognition=0,bFaceRecognitionList=0,iFaceSize=80,iFaceDetectRate=4,iFaceMatchThrd=600
  28. 10-10 13:42:36.587 9576-9576/com.smarteye.mpu D/CameraHolder: onPreviewFrame: 1382400
  29. 10-10 13:42:36.624 9576-9576/com.smarteye.mpu D/CameraHolder: onPreviewFrame: 1382400
  30. 10-10 13:42:36.651 9576-9687/com.smarteye.mpu I/SIP: hSession = 1,iEventCode = 1,iResult = 0
  31.     register ok!
  32. 10-10 13:42:36.652 9576-9576/com.smarteye.mpu D/MPUService: onMessageFromNative login
  33. 10-10 13:42:36.655 9576-9683/com.smarteye.mpu I/SIP: pMsg->iAction = 3
  34.     BVCSP_SendCmd result[0]
  35.     send cmd[5632]
  36. 10-10 13:42:36.664 9576-9576/com.smarteye.mpu D/CameraHolder: onPreviewFrame: 1382400
  37. 10-10 13:42:36.709 9576-9576/com.smarteye.mpu D/CameraHolder: onPreviewFrame: 1382400
  38. 10-10 13:42:36.727 9576-9712/com.smarteye.mpu I/WifiIPC: videoHeight = 720, videoWidth = 1280
  39. 10-10 13:42:36.727 9576-9712/com.smarteye.mpu E/WifiIPC: [9712*wifiipc.cpp:146:describeHandler]:0x0
  40.     [9712*wifiipc.cpp:146:describeHandler]:0x0
  41.     [9712*wifiipc.cpp:146:describeHandler]:0x0
  42.     [9712*wifiipc.cpp:146:describeHandler]:0x1
  43.     [9712*wifiipc.cpp:146:describeHandler]:0x67
  44.     [9712*wifiipc.cpp:146:describeHandler]:0x42
  45.     [9712*wifiipc.cpp:146:describeHandler]:0x0
  46.     [9712*wifiipc.cpp:146:describeHandler]:0x1F
  47.     [9712*wifiipc.cpp:146:describeHandler]:0x95
  48.     [9712*wifiipc.cpp:146:describeHandler]:0xA8
  49.     [9712*wifiipc.cpp:146:describeHandler]:0x14
  50.     [9712*wifiipc.cpp:146:describeHandler]:0x1
  51.     [9712*wifiipc.cpp:146:describeHandler]:0x6E
  52.     [9712*wifiipc.cpp:146:describeHandler]:0x40
  53.     [9712*wifiipc.cpp:146:describeHandler]:0x0
  54.     [9712*wifiipc.cpp:146:describeHandler]:0x0
  55.     [9712*wifiipc.cpp:146:describeHandler]:0x0
  56.     [9712*wifiipc.cpp:146:describeHandler]:0x1
  57.     [9712*wifiipc.cpp:146:describeHandler]:0x68
  58.     [9712*wifiipc.cpp:146:describeHandler]:0xCE
  59.     [9712*wifiipc.cpp:146:describeHandler]:0x3C
  60.     [9712*wifiipc.cpp:146:describeHandler]:0x80
  61. 10-10 13:42:36.727 9576-9712/com.smarteye.mpu I/WifiIPC: extraDataLen = 22
  62. 10-10 13:42:36.731 9576-9712/com.smarteye.mpu I/ACodec:  [] Now uninitialized
  63. 10-10 13:42:36.731 9576-9731/com.smarteye.mpu I/ACodec: [] onAllocateComponent
  64. 10-10 13:42:36.733 9576-9731/com.smarteye.mpu I/OMXClient: MuxOMX ctor
  65. 10-10 13:42:36.733 9576-9731/com.smarteye.mpu I/ACodec: Set Google AAC Dec for aacProfile 0
  66. 10-10 13:42:36.745 9576-9576/com.smarteye.mpu D/CameraHolder: onPreviewFrame: 1382400
  67. 10-10 13:42:36.759 9576-9731/com.smarteye.mpu I/ACodec: [OMX.qcom.video.decoder.avc] Now Loaded
  68. 10-10 13:42:36.760 9576-9712/com.smarteye.mpu I/CVideoDecode: AMediaCodec_createDecoderByType success!
  69. 10-10 13:42:36.760 9576-9712/com.smarteye.mpu I/MediaCodec: [9576] init()
  70.     new RemoteDisplayInterface(mReflector)++
  71. 10-10 13:42:36.762 9576-9712/com.smarteye.mpu I/MediaCodec: new RemoteDisplayInterface(mReflector)--
  72. 10-10 13:42:36.763 9576-9731/com.smarteye.mpu I/ACodec: get current pid
  73.     app-pid : 9576
  74. 10-10 13:42:36.763 9576-9731/com.smarteye.mpu I/ExtendedACodec: setupVideoDecoder()
  75.     vpp-enable search is 0 and value is 0
  76. 10-10 13:42:36.778 9576-9731/com.smarteye.mpu I/ExtendedACodec: Decoder will be in frame by frame mode
  77. 10-10 13:42:36.779 9576-9731/com.smarteye.mpu I/ACodec: [OMX.qcom.video.decoder.avc] OMX_QCOM_FramePacking_OnlyOneCompleteFrame is setting
  78. 10-10 13:42:36.785 9576-9576/com.smarteye.mpu D/CameraHolder: onPreviewFrame: 1382400
  79. 10-10 13:42:36.791 9576-9712/com.smarteye.mpu I/CVideoDecode: AMediaCodec_configure success!
  80. 10-10 13:42:36.792 9576-9731/com.smarteye.mpu I/ACodec: [OMX.qcom.video.decoder.avc] Now Loaded->Idle
  81. 10-10 13:42:36.824 9576-9576/com.smarteye.mpu D/CameraHolder: onPreviewFrame: 1382400
  82. 10-10 13:42:36.843 9576-9731/com.smarteye.mpu I/ACodec: [OMX.qcom.video.decoder.avc] Now Idle->Executing
  83. 10-10 13:42:36.843 9576-9712/com.smarteye.mpu I/CVideoDecode: AMediaCodec_start success!
  84. 10-10 13:42:36.843 9576-9712/com.smarteye.mpu I/WifiIPC: init codec success!
  85. 10-10 13:42:36.844 9576-9576/com.smarteye.mpu D/MPUService: onMessageFromNative rtspcam.control.response
  86. 10-10 13:42:36.844 9576-9576/com.smarteye.mpu D/WifiIPC: response = {"szCmd": "DESCRIBE", "iStatus":200,"iWidth":1280,"iHeight":720,"bHasAudio":1}
  87. 10-10 13:42:36.844 9576-9576/com.smarteye.mpu D/RTSPCamControl: {"szCmd": "DESCRIBE", "iStatus":200,"iWidth":1280,"iHeight":720,"bHasAudio":1}
  88. 10-10 13:42:36.845 9576-9576/com.smarteye.mpu I/RTSPCamControl: RTSP_CMD_DESCRIBE success
  89. 10-10 13:42:36.846 9576-9731/com.smarteye.mpu I/ACodec: [OMX.qcom.video.decoder.avc] Now Executing
  90. 10-10 13:42:36.847 9576-9576/com.smarteye.mpu I/selectCodec: SelectCodec : OMX.qcom.video.encoder.hevc
  91. 10-10 13:42:36.849 9576-9576/com.smarteye.mpu D/MPUCameraUtil: tempEffect none
  92. 10-10 13:42:37.019 9576-9576/com.smarteye.mpu D/baidu_location_client: baidu location connected ...
  93. 10-10 13:42:37.020 9576-9711/com.smarteye.mpu I/WifiIPC: {"bHasAudio":0,"iHeight":0,"iStatus":0,"iWidth":0,"szCmd":"PLAY","szUrl":"rtsp://192.168.43.59:554/rtsp_live0"}
  94. 10-10 13:42:37.024 9576-9576/com.smarteye.mpu D/MPU-----: txtNativeRecord   true
  95. 10-10 13:42:37.026 9576-9576/com.smarteye.mpu V/Vibrator: Called vibrate(long[], int) API!
  96.     vibrate(long[], int, AudioAttributes) API - PUID: 10266, PackageName: com.smarteye.mpu, repeat: -1, AudioAttr: null
  97.     Called vibrate(int, String, long[], int, AudioAttributes) API
  98. 10-10 13:42:37.026 9576-9576/com.smarteye.mpu V/Vibrator: semVibrate - PUID: 10266, PackageName: com.smarteye.mpu, token: android.os.Binder@e652c23, pattern, repeat: -1, AudioAttr: null, Mag: TYPE_EXTRA
  99. 10-10 13:42:37.033 9576-9576/com.smarteye.mpu I/com.smarteye.control.RecordControl:  [ACTION] [000000] [000000] 开始录像
  100. 10-10 13:42:37.033 9576-9576/com.smarteye.mpu I/selectCodec: SelectCodec : OMX.qcom.video.encoder.hevc
  101. 10-10 13:42:37.034 9576-9576/com.smarteye.mpu I/selectCodec: SelectCodec : OMX.qcom.video.encoder.hevc
  102.     SelectCodec : OMX.qcom.video.encoder.hevc
  103. 10-10 13:42:37.034 9576-9576/com.smarteye.mpu D/AudioHelper: bCapture = 1
  104. 10-10 13:42:37.037 9576-9760/com.smarteye.mpu I/Storage: StorageThread::run
  105. 10-10 13:42:37.038 9576-9760/com.smarteye.mpu I/codec_omxal: m_encode.iEncoderType = 0, m_out = 0xd17fffc0, m_encode.iColorFormat = 1
  106. 10-10 13:42:37.070 9576-9681/com.smarteye.mpu I/Render: m_rawFmt = 0, m_render.iYUVConvert = 6
  107. 10-10 13:42:37.070 9576-9681/com.smarteye.mpu D/BVDisplay: scale = 0.000000
  108. 10-10 13:42:37.071 9576-9765/com.smarteye.mpu I/codec_omxal: VideoEncode::run tid = 9765 m_yuvDst = 0x0
  109.     AMediaCodec_createEncoderByType szMimeType=video/avc
  110. 10-10 13:42:37.071 9576-9766/com.smarteye.mpu I/MPU_Codec: SAVThread::run.............
  111. 10-10 13:42:37.072 9576-9765/com.smarteye.mpu I/ACodec:  [] Now uninitialized
  112. 10-10 13:42:37.073 9576-9768/com.smarteye.mpu I/ACodec: [] onAllocateComponent
  113. 10-10 13:42:37.074 9576-9768/com.smarteye.mpu I/OMXClient: MuxOMX ctor
  114. 10-10 13:42:37.074 9576-9768/com.smarteye.mpu I/ACodec: Set Google AAC Dec for aacProfile 0
  115. 10-10 13:42:37.093 9576-9768/com.smarteye.mpu I/ACodec: [OMX.qcom.video.encoder.avc] Now Loaded
  116. 10-10 13:42:37.093 9576-9765/com.smarteye.mpu I/codec_omxal: AMediaCodec_createEncoderByType success
  117. 10-10 13:42:37.094 9576-9768/com.smarteye.mpu W/ACodec: [OMX.qcom.video.encoder.avc] storeMetaDataInBuffers (output) failed w/ err -1010
  118. 10-10 13:42:37.094 9576-9768/com.smarteye.mpu I/ACodec: get current pid
  119.     app-pid : 9576
  120. 10-10 13:42:37.094 9576-9768/com.smarteye.mpu I/ExtendedACodec: setupVideoEncoder()
  121. 10-10 13:42:37.095 9576-9768/com.smarteye.mpu W/ACodec: do not know color format 0x7fa30c06 = 2141391878
  122.     do not know color format 0x7fa30c04 = 2141391876
  123. 10-10 13:42:37.096 9576-9768/com.smarteye.mpu W/ACodec: do not know color format 0x7fa30c08 = 2141391880
  124.     do not know color format 0x7fa30c07 = 2141391879
  125.     do not know color format 0x7f000789 = 2130708361
  126. 10-10 13:42:37.099 9576-9576/com.smarteye.mpu D/MPUService: onMessageFromNative rtspcam.control.response
  127. 10-10 13:42:37.099 9576-9576/com.smarteye.mpu D/WifiIPC: response = {"szCmd": "PLAY", "iStatus":200}
  128. 10-10 13:42:37.099 9576-9576/com.smarteye.mpu D/RTSPCamControl: {"szCmd": "PLAY", "iStatus":200}
  129. 10-10 13:42:37.100 9576-9576/com.smarteye.mpu I/RTSPCamControl: RTSP_CMD_PLAY success
  130. 10-10 13:42:37.106 9576-9768/com.smarteye.mpu I/ACodec: app-name : com.smarteye.mpu
  131.     setupAVCEncoderParameters with [profile: Baseline] [level: Level1]
  132. 10-10 13:42:37.108 9576-9768/com.smarteye.mpu I/ACodec: Success set VideoMinQP(2) VideoMaxQP(51)
  133.     Success set IPB VideoMinQP(2/2/2) VideoMaxQP(51/51/51)
  134. 10-10 13:42:37.110 9576-9768/com.smarteye.mpu I/ACodec: [OMX.qcom.video.encoder.avc] cannot encode HDR static metadata. Ignoring.
  135.     setupVideoEncoder succeeded
  136. 10-10 13:42:37.110 9576-9768/com.smarteye.mpu I/ExtendedACodec: [OMX.qcom.video.encoder.avc] configure, AMessage : AMessage(what = 'conf', target = 5) = {
  137.       string mime = "video/avc"
  138.       int32_t bitrate = 2764800
  139.       int32_t frame-rate = 25
  140.       int32_t color-format = 21
  141.       int32_t width = 1280
  142.       int32_t height = 720
  143.       int32_t max-width = 1280
  144.       int32_t max-height = 720
  145.       int32_t i-frame-interval = 1
  146.       int32_t stride = 1280
  147.       int32_t max-input-size = 1382400
  148.       int32_t encoder = 1
  149.     }
  150. 10-10 13:42:37.116 9576-9765/com.smarteye.mpu I/codec_omxal: AMediaCodec_configure success!
  151. 10-10 13:42:37.116 9576-9768/com.smarteye.mpu I/ACodec: [OMX.qcom.video.encoder.avc] Now Loaded->Idle
  152. 10-10 13:42:37.127 9576-9768/com.smarteye.mpu I/ACodec: [OMX.qcom.video.encoder.avc] Now Idle->Executing
  153. 10-10 13:42:37.128 9576-9765/com.smarteye.mpu I/codec_omxal: AMediaCodec_start success!
  154. 10-10 13:42:37.128 9576-9768/com.smarteye.mpu I/ACodec: [OMX.qcom.video.encoder.avc] Now Executing
  155. 10-10 13:42:37.458 9576-9576/com.smarteye.mpu I/BaiduLocationTools: location.getLocType----->161
  156. 10-10 13:42:37.542 9576-9576/com.smarteye.mpu D/MPUService: onMessageFromNative auth
  157. 10-10 13:42:37.542 9576-9576/com.smarteye.mpu I/BillTool: auth---->{"iAuthStatus": 200, "szAuthType":"auth.type.imei"}
  158. 10-10 13:42:37.543 9576-9576/com.smarteye.mpu D/MPUService: onMessageFromNative auth.update.param
  159. 10-10 13:42:38.473 9576-9576/com.smarteye.mpu I/BaiduLocationTools: location.getLocType----->161
  160. 10-10 13:42:39.468 9576-9576/com.smarteye.mpu I/BaiduLocationTools: location.getLocType----->161
  161. 10-10 13:42:39.699 9576-9576/com.smarteye.mpu D/MPU: onFocus: -------
  162. 10-10 13:42:39.865 9576-9687/com.smarteye.mpu I/SIP: iEventCode = 1,hDialog = 2, channelIndex =65536
  163. 10-10 13:42:39.865 9576-9802/com.smarteye.mpu I/PUDialog: new a dialog,hDialog = 2,channelIdx = 65536
  164.     processInviteGPS+++++++++++++++++++++++
  165. 10-10 13:42:39.867 9576-9576/com.smarteye.mpu D/MPUService: onMessageFromNative invite.gps
  166. 10-10 13:42:40.056 9576-9687/com.smarteye.mpu D/BVP2P: file = jni/BVP2P.cpp,line = 90
  167.     file = jni/Global.cpp,line = 204
  168.     file = jni/Global.cpp,line = 209
  169.     file = jni/MSession.cpp,line = 180
  170.     file = jni/MSession.cpp,line = 204,pjStatus=0
  171.     file = jni/MSession.cpp,line = 231,pjStatus=0
  172. 10-10 13:42:40.057 9576-9687/com.smarteye.mpu D/BVP2P: file = jni/MSession.cpp,line = 261,pjStatus=0
  173.     file = jni/MSession.cpp,line = 272,pjStatus=0
  174. 10-10 13:42:40.180 9576-9687/com.smarteye.mpu I/PUDialog: start transfer data, hDialog = 2, pParam->iResult == 0
  175. 10-10 13:42:40.476 9576-9576/com.smarteye.mpu I/BaiduLocationTools: location.getLocType----->161
  176.     not in avi mode
  177.     not in avi mode
  178. 10-10 13:42:40.804 9576-9731/com.smarteye.mpu E/ExtendedACodec: Failed to getParameter for port 1
  179. 10-10 13:42:40.804 9576-9731/com.smarteye.mpu E/ACodec: [OMX.qcom.video.decoder.avc] Failed to get port format to send format change
  180. 10-10 13:42:40.805 9576-9731/com.smarteye.mpu I/ACodec: [OMX.qcom.video.decoder.avc] Now handling output port settings change
  181. 10-10 13:42:40.891 9576-9731/com.smarteye.mpu I/ACodec: [OMX.qcom.video.decoder.avc] Now Executing
  182. 10-10 13:42:40.973 9576-9731/com.smarteye.mpu I/ACodec: [OMX.qcom.video.decoder.avc] OMX_EventPortSettingsChanged 0x7f000062
  183. 10-10 13:42:41.003 9576-9649/com.smarteye.mpu D/StorageStrategyControl: --------avail storage 229553.0
  184. 10-10 13:42:41.055 9576-9711/com.smarteye.mpu I/CVideoDecode: width = 1920,height = 1088
  185. 10-10 13:42:41.121 9576-9765/com.smarteye.mpu E/NdkMediaCodec: sf error code: -22
  186. 10-10 13:42:41.140 9576-9681/com.smarteye.mpu I/Render: size.iHeight = 1088, size.iWidth = 1920
  187. 10-10 13:42:41.158 9576-9711/com.smarteye.mpu I/codec_omxal: ..........dt enc
copycode
reply agree Against

使用道具 report

4

主题

19

帖子

52

积分

member

Rank: 2

积分
52
5#
 Owner| poston 2018-10-10 13:46 | authorOnly
奔溃后就打印这一句

10-10 13:45:44.377 9576-9683/com.smarteye.mpu A/libc: Fatal signal 11 (SIGSEGV), code 1, fault addr 0x0 in tid 9683 (om.smarteye.mpu)
reply agree Against

使用道具 report

4

主题

19

帖子

52

积分

member

Rank: 2

积分
52
6#
 Owner| poston 2018-10-10 13:48 | authorOnly
奔溃的问题出现不是很频繁
reply agree Against

使用道具 report

2

主题

414

帖子

1188

积分

vipMem

Rank: 6Rank: 6

积分
1188
7#
poston 2018-10-10 14:07 | authorOnly
赛腾信息 post on2018-10-10 13:48
奔溃的问题出现不是很频繁

1.连接眼镜的日志没有崩溃日志信息
2.更新今天发给你们的MPU_Lib库了么
reply agree Against

使用道具 report

10

主题

531

帖子

2491

积分

admin

Rank: 9Rank: 9Rank: 9

积分
2491
8#
poston 2018-10-10 14:11 | authorOnly
不是在你们那个最古老的music上做的吧?
reply agree Against

使用道具 report

4

主题

19

帖子

52

积分

member

Rank: 2

积分
52
9#
 Owner| poston 2018-10-10 14:19 | authorOnly
admin post on2018-10-10 14:11
不是在你们那个最古老的music上做的吧?

是你们的MPU
reply agree Against

使用道具 report

4

主题

19

帖子

52

积分

member

Rank: 2

积分
52
10#
 Owner| poston 2018-10-10 14:20 | authorOnly
xuwei post on2018-10-10 14:07
1.连接眼镜的日志没有崩溃日志信息
2.更新今天发给你们的MPU_Lib库了么

连接眼镜的日志 是想问问您是不是哪个参数没有配置 导致 预览为黑白 传输颜色正常  
reply agree Against

使用道具 report

creditRule

QQ|wireless surveillance

GMT+8, 2024-12-22 21:11 , Processed in 0.059573 second(s), 19 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

QuickReply backToTop BackToList