mobile CCTV,mobile surveillance,police body worn cameras

标题: 按钮功能更换 [打印本页]

author: viveon time: 2017-4-7 17:48
标题: 按钮功能更换
按钮功能是否可以满足如下条件进行更换：
1.Not having the “Back” button to exit the camera application

2.Changing the SOS/Alert button from being a long press of the “UP” key to by a short press on the audio record button instead. (There is no need for audio record button because by pressing the video record button, it will record both video and voice.)
***THIS IS THE MOST IMPORTANT POINT***

3.A continuation of point number 2. Once you press the SOS/Alert button, the control centre, ie.: SMARTEYE monitor will start to stream the video and voice as well as record at the same time. In other words, when you power on the bodyworn camera, SMARTEYE monitor will register that the unit is online BUT no video or voice will be streamed. Once the SOS/Alert button is pressed, the video and voice will stream to SMARTEYE monitor and record both video and voice at the same time.

4.From point number 2 and 3. That means the video record button will not have any function when pressed.

author: besovideo time: 2017-4-7 18:05
1. the power key serves as back/return
2. change key definition is a big work, you know, in China, there is a country standard for those bodyworn cameras, a standalone audio record key is demanded in the standard, so this is no useless. if customer wants to change key function, they have to pay 2000USD or put a 30pcs PO.
3. this is a standard function of VMS platform, called "respond to alarm", you may setup a response rule in smarteye client/manager.exe, I shall show you how.
4. as said above, it's our country's standard, it's demanded arbitary.

欢迎光临 mobile CCTV,mobile surveillance,police body worn cameras (http://bbs.besovideo.com:8067/)