mobile CCTV,mobile surveillance,police body worn cameras

标题: Smart Eye Monitor - GPS issue [打印本页]

author: peter time: 2018-10-18 21:13
标题: Smart Eye Monitor - GPS issue
Hi,
I got camera WZ128 placed in the building,
on cam I got enabled Cell locate
[attach]1551[/attach]

on cam I got "correct" location

[attach]1555[/attach]
On Smart Eye Manager I got correct location
[attach]1553[/attach]

but in smart Eye Monitor the location is shown rarely or not at all

[attach]1554[/attach]

also I got error in Event Manager:
Open device Gps failed: Server:127.0.0.1:9701 DeviceName:cam21 Channel:GPS

The location that is shown in the Smart Eye Manager should be also shown on the map in the Smart Eye Monitor. Please fix it

thank you
BR
Piotr

author: admin time: 2018-10-18 21:51
hello ,cell locate is not real GPS,
will offset over 30meters,
pls test outdoor to enable real GPS by satellite ,
will show how many satellite found in manager.

author: peter time: 2018-10-19 15:11
if I have checked " cell locate" in MPU I want to have GMS location working when GPS is not available. eg. when I am in building.
you do not see the issue?

If I have location in Smart Eye Manager I want also have location in Smart Eye Monitor

author: admin time: 2018-10-19 15:19
cell locate is only for approximate location, not accurate, just for test indoor, there is big offset.

author: peter time: 2018-10-19 21:15
it is not the essence of this case whether the cell locate is accurate or not
only that I have an location visable in StreamEye Manager and I do not have it on the map in Stream Eye Monitor
are you able to fix it?

author: besovideo time: 2018-10-20 00:00
maybe just an operation problem?
have to check on "show route" on the device.

author: peter time: 2018-10-23 15:40
the reason for the issues with the position in the Smart Eye Monitor was that the MPU had a wrong port 9701 instead of 9702.

author: admin time: 2018-10-23 19:47
wow, how could it log in ?

author: peter time: 2018-10-24 15:12
yes, cam is working also on 9701 port but not correctly

author: peter time: 2018-10-26 17:28
this case is not yet resolved
it turns out that the issue does not occur in the Smart Eye Monitor version 0.2.0.10213 (2017-11-15)

but the issue is present in the latst version of Smart Eye Monitor
(it does not show the location on the map, even if it is visible in the Smart Eye Manager -GPS)

I had to make downgrade

author: admin time: 2018-10-31 16:55
just more tries, should be no problem.
more check, and may update from
up.besovideo.com:7780

欢迎光临 mobile CCTV,mobile surveillance,police body worn cameras (http://bbs.besovideo.com:8067/)